← All work
Final film
Case 12
VFX revision on real footageSans Air Purifier Mini

The filter had to look used.

A client note on a filmed UGC clip: make the filter look dirty. Fixed in post, in 4K at 60 frames, with the creator’s hands moving over it.

Client pain
The whole ad sells a dirty filter, but the filmed one came out clean white. A reshoot meant a new creator day, and the approved edit could not change.
Delivered
9:160:074K · 60 fpsOriginal audio
Tools
Python · OpenCVClaude
My role
Creative direction, casting, sets, prompts, generation, edit, captions, sound and delivery.

The story

What the client needed, what made it hard, the idea that solved it, and what came out.

  1. 01 The ask

    Sans’s note on a filmed UGC clip was one line: the filter looks brand new, make it look dirty.

  2. 02 The catch

    It is real footage in 4K at 60 frames. The creator’s hands and a white cover move over a white filter, and anything pasted on will slide, glow or stain the cover.

  3. 03 The idea

    Don’t add a texture. Age the filter itself: darken and warm its own pixels the way dust would, so the light, the grain and the pleats stay real.

  4. 04 The result

    Both reveals now show a month-old filter, the cover and hands are clean on every frame, and the client’s edit and sound are untouched.

The creative call

The viewer should wince at what the filter caught, and never question the shot.

The cliché I said no to

A flat grey overlay that slides when the cover moves.

The detail that makes it real

The dust sits deeper in the pleat valleys and heavier through the middle, where the air actually passes.

Beat by beat

Clip · 0:07, two reveals. Each block is sized by how long it runs, so you can see where the attention is spent.

  1. 0:00 Set-upCreator with the purifier, cover on.
  2. 0:00 Reveal 1Cover off: the used filter.
  3. 0:02 CoverBack on. Frames untouched.
  4. 0:02 Reveal 2Opened again, same dust in the same place.
  5. 0:05 EndClosed purifier, untouched.

How it was built

The real sequence on this project, step by step.

  1. Read the note

    Claude

    One clip, two reveals, a reference photo of a month-old filter. Target: warm grey-beige, not black.

  2. Map the filter

    Python · OpenCV

    Locate the filter area in each reveal and keep a clean reference of it, so every frame has the same footprint.

  3. Build dust that behaves like dust

    Python · OpenCV

    Layered noise for uneven loading, streaks that run along the pleats, fine specks. Heavier through the middle where the air flows, lighter at the end caps, packed deeper in the pleat valleys.

  4. Light it with the shot

    Python · OpenCV

    Dust darkens and desaturates the filter’s own pixels, so the shot’s light, shadow and grain stay. Nothing is pasted on top, and the dust never moves on the filter.

  5. Protect the cover and hands

    Python · OpenCV

    An automatic matte came first, but it left grey smudges on the cover’s shaded side. I switched to tracing the cover edge by hand on every frame pair and tightened the safety margin from 25 to 12 pixels.

  6. Check and deliver

    Python · OpenCV

    Every frame reviewed. Cover, hands and the closed purifier untouched. Delivered at the original 4K, 60 fps and length, with a before-and-after still for the client.

The production board

The actual assets from this job. Tap a still to see it full size.

The brief

Client referenceLocked
Client referenceNew filter next to a used one. This set the target.
Motion
BeforeThe creator’s clip as filmed: clean white filter.

The fix

Motion
AfterSame clip, used filter, same light and grain.
Before / after
Before / afterThe still sent to the client with the video.
Behind the shot

The dust recipe · run on every frame

I don’t describe a shot to the AI. I direct it: references, lens, camera height, where the light comes from, what is said, and what must never change.

No overlayPleat-awareAirflowHand roto4K · 60 fps

Made with

Python · OpenCVClaude
SANS AIR PURIFIER MINI · DIRECTION
1  footprint  filter area and a clean reference per reveal
2  loading    layered noise for uneven dust, streaks along pleats
3  airflow    heavier through the middle, lighter at the end caps
4  cavity     pleat valleys trap more dust than the ridges
5  age        darken and desaturate toward warm grey-beige,
              keeping the shot's own light, shadow and grain
6  hold       dust is fixed to the filter, it never drifts
7  roto       cover edge traced by hand on every frame pair,
              12 px safety above the motion-blurred edge
8  check      every frame: cover, hands and end shot untouched

The finish

What happened in the edit and the mix.

Light

Dust follows the shot’s own light and shadow direction.

Behaviour

Dust sits deeper in the pleats and heavier where air passes, and it stays fixed to the filter.

Roto

Cover edge traced by hand so no grey reaches the cover or hands.

Untouched

Client’s cuts, timing, colour and sound left exactly as approved.

Delivery

4K, 60 fps, original audio, plus a before-and-after still.

Service AI UGC ads

Have a reference video? Let’s make yours.

Send me the brief. I’ll reply with a shot plan and the characters I’d lock first.

Message me on LinkedIn
Brief builder · 30 seconds
What do you need?
Format
When
Email this brief →
Start a project · brief in 30s